Beko RDNT200I50VP, Руководство пользователя

Страница: 8 / 37

EN 7
3 Installation
In case the information which are given in the user manual are not
taken into account, manufacturer will not assume any liability for this.
Points to be paid attention to when the relocation of the refrigerator
1.
Your refrigerator should be unplugged.Before transportation of
your refrigerator, it should be emptied and cleaned.
2.
Before it is re-packaged, shelves, accessories, crisper, etc. inside your
red against impacts.
be bound with a thick tape or sound ropes and the transportation
on the package should be strictly observed.
3.
Original packaging and foam materials should be kept for future
transportations or moving.
Before you start the refrigerator, Check the following
start to use your refrigerator:
1.
Clean the interior of the refrigerator as recommended in the
“Maintenance and cleaning” section.
2.
Connect the plug of the refrigerator to the wall socket. When the fridge door
is opened, fridge internal lamp will turn on.
3.
When the compressor starts to operate, a sound will be heard. The
liquid and gases sealed within the refrigeration system may also give rise
to noise, even if the compressor is not running and this is quite normal.
4.
. Front edges and both sides of the refrigerator may feel warm. This is
normal. These areas are designed to be warm to avoid condensation.
Electrical connection
Connect your product to a grounded socket which is being protected by a
fuse with the appropriate capacity.
Important: The connection must be in compliance with national regulations.
• The power plug must be easily accessible after installation.
• Electrical safety of your refrigerator shall be guaranteed only if the earth
system in your house complies with standards.
• The voltage stated on the label located at left inner side of your
product should be equal to your network voltage.
• Extension cables and multi plugs must not be used for connection.
refrigerator should be
Package should
rules
before you
A damaged power cable must be replaced by a quali d electrician.
Product must not be operated before it is repaired! There is the risk of electric shock!
Disposing of the packaging
The packing materials may be dangerous for children. Keep the packing materials.
of children or dispose of them by classifying them in accordance with
the waste instructions stated by your local authorities. Do not throw away
with regular house waste, throw away on packaging pick up spots designated by
The packing of your refrigerator is produced from recyclable
out of the reach
the local authorities
materials.