background image

This product was manufactured using the latest technology in environmentally friendly conditions.

1  Important instructions for safety and environment

This section contains safety instructions that will help protect from risk of personal 

injury or property damage. Failure to follow these instructions shall void any warran-

ty.

1.1 General safety

• This product can be used by children at and above 8 years old and by persons 

whose physical, sensory or mental capabilities were not fully developed or who 

lack experience and knowledge provided that they are supervised or trained on 

the safe usage of the product and the risks it brings out. Children must not play 

with the product. Cleaning and maintenance works should not be performed by 

children unless they are supervised by someone. Children of less than 3 years 

should be kept away unless continuously supervised.

• Never place the product on a carpet-covered floor. Otherwise, lack of airflow be-

neath the machine will cause electrical parts to overheat. This will cause problems 

with your product.

• If the product has a failure, it should not be operated unless it is repaired by the 

Authorized Service Agent. There is the risk of electric shock!

• This product is designed to resume operating in the event of powering on after a 

power interruption. If you wish to cancel the programme, see "Cancelling the pro-

gramme" section.

• Connect the product to a grounded outlet protected by a 16 A fuse. Do not neglect 

to have the grounding installation made by a qualified electrician. Our company 

shall not be liable for any damages that will arise when the product is used wi-

thout grounding in accordance with the local regulations.

• The water supply and draining hoses must be securely fastened and remain unda-

maged. Otherwise, there is the risk of water leakage.

• Never open the loading door or remove the filter while there is still water in the 

drum. Otherwise, risk of flooding and injury from hot water will occur.

• Do not force open the locked loading door. The loading door will be ready to open 

just a few minutes after the washing cycle comes to an end. In case of forcing the 

loading door to open, the door and the lock mechanism may get damaged.

• Unplug the product when not in use.

• Never wash the product by spreading or pouring water onto it! There is the risk of 

electric shock!

• Never touch the plug with wet hands! Never unplug by pulling on the cable, always 

pull out by grabbing the plug.

Содержание EV 7103
























Отзывы: