Beko DV 1562 X, Руководство пользователя

Страница: 8 / 40

8 - EN
damage the walls and furniture in the
room.
C
The ventilation hose can be routed
outdoors via a window or it can be
connected to the air outlet in the
bathroom.
C
Air outlet hose must be routed directly
to the outdoors. There must be a
limited number of elbows as not to
hinder ventilation.
C
To prevent water accumulation in the
hose, make sure that it is not folded on
the floor.
B
The ventilation hose should not be
connected to the chimney of a stove or
a fireplace.
B
Do not operate your product at the
same time with heaters such as a coal
or gas stove. Airflow may cause the
chimney to flare up.
Adjusting feet
In order to ensure that your product
operates more silently and vibration-
free, it must stand level and balanced on
its feet. Front feet of your product can
be adjusted. Balance the machine by
adjusting the feet.
1. Loosen the feet by hand.
2. Adjust the feet until the product stands
level and firmly on the floor.
C
Do not use any tools to loosen the
adjustable feet, otherwise, they can be
damaged.
C
Never remove the adjustable feet from
their housings.
C
You may supply 2 plastic pieces
from an Authorized Service with
2951620100 part number. These parts
prevent your machine from slipping
when the machine locates on wet and
slippery surfaces. You may assemble
mentioned parts to the front adjustable
feet by fitting and pressing them to
snap into ground of feet.
Electrical connection
Connect the machine to an earthed outlet
protected by a fuse of suitable capacity.
Important:
• Connection should comply with
national regulations.
• Power cord plug must be within easy
reach after installation.
• The voltage and the allowed fuse
protection are specified in the section
“Technical Specifications”.
• The stated voltage must match with
your mains voltage.
• Connection via extension cords or
multi-plugs should not be made.
• The main fuse and switches must have
a contact distance of minimum 3 mm.
B
A damaged power cable must be
replaced by a qualified electrician.
B
The appliance must not be operated
unless it is repaired! There is the risk of
electric shock!
First use
• To have the product ready for
operation before calling the authorised
service agent, make sure that its
location and power supply installations
are appropriate. If they are not, call
a qualified electrician to have any
necessary arrangements carried out.
• Make sure that the power connections
of the product are in accordance
with the instructions given in relevant
chapters of this manual.
Disposing of packaging
material
Packaging materials are dangerous to
children. Keep packaging materials in
a safe place out of reach of children.
Packaging materials of your product are