Beko DV 1562 X, Руководство пользователя

Страница: 18 / 40

18 - EN
Sensor (models with a sensor)
There are humidity sensors in your dryer
that detect whether the laundry is dry or
not.
To clean the sensor:
1. Open the loading door of the dryer.
2. Allow the machine to cool down if
drying has been carried out.
3. Wipe the metal sensors with a soft
cloth, dampened with vinegar and dry
them.
C
Clean metal sensors 4 times a year.
A
Never use solvents, cleaning agents
or similar substances when cleaning
since these materials can cause fire
and explosion!
Lint filter
Lint and fibres released from the laundry
to the air during the drying cycle are
collected in the “Lint Filter”.
C
Such fibre and lint are generally formed
during wearing and washing.
C
Always clean the filter after each drying
process.
C
You can clean the filter and filter area
by vacuum cleaner.
Figure 1
Figure 2
To clean the filter:
1.Take out the cover.
2.a) If the product’s lint filter can be
opened as shown in Figure 1, remove
the filter by pulling it up and open the
filter.
2.b) If the product’s lint filter is as shown
in Figure 2, remove the filter by pulling
it up.
3. Clean lint, fibre, and cotton raveling
on the filter and in the filter housing by
hand or with a soft piece of cloth.
4. Close the filter and place it back into
its seat.
C
Clogging may arise on the filter surface
after using your machine for some
time; if this occurs, wash the filter with
water and dry it before using again.
7 Maintenance and cleaning