Beko DSN15420X, Руководство пользователя

Страница: 42 / 46

Repair
Limescale remains on dishes and glass looks dull
• There is not enough rinse aid. >>> Check the rinse aid indicator and add
rinse aid if necessary. Increase the rinse aid setting if there is enough rinse
aid in the machine.
• Water hardness setting is low or salt level is insufficient >>> Measure supply
water hardness and check water hardness setting.
• There are salt leaks. >>> Be careful not to spill salt around the salt filling
hole when adding salt. Always make sure the lid of the salt container is
properly closed after filling. Run the pre-wash program to remove the salt
scattered in the appliance. As the remaining salt granules under the lid will
be dissolved during the prewash and loosen the lid, check the lid again at
the end of the programme.
There is a peculiar smell in the machine
VS
A new machine has a specific smell. It will fade after a few washes.
•
The filters are clogged. >>> Check if the filter system is clean. Periodically
clean the filter system as shown in the “Cleaning and Maintenance”
section.
•
Dirty dishes stay in the dishwasher for 2-3 days. >>>If you do not start the
appliance immediately after putting the dishes in, remove the remains on
the dishes and run a Prewash program without detergent every 2 days. In
these cases, do not completely close the door of the machine to prevent
odors from arising. You can also use commercially available odor removers
or machine cleaners.
Rust, discoloration or surface deterioration damages dishes
• There are salt leaks. >>> Salt can cause deterioration and oxidation of metal
surfaces. Be careful not to spill salt around the salt filler hole when adding
salt. Always make sure the lid of the salt container is properly closed after
filling. Run the pre-wash program to remove the salt scattered in the
appliance. As the remaining salt granules under the lid will be dissolved
during the prewash and loosen the lid, check the lid again at the end of the
programme.
•
Salty food remnants remained on the dishes for a long time. >>> If cutlery
soiled by this kind of food is left in the machine, the dirt must be removed by
pre-washing or the dishes must be washed immediately.
•
The electrical installation is not earthed. >>>Check that the dishwasher is connected
to the ground line. Otherwise, static electricity created on the product will cause arcs
on the surfaces of metal parts by forming pores, removing the protective layers from
the surface and causing discoloration.
40 /44 EN
Dishwasher / Instructions for use