Beko DSN15420X, Руководство пользователя

Страница: 16 / 46

Preperation
remove the
strip
sound test
packaging.
Open the faucet
of water and let
sink about one
minute.
maintain the
test strip
in the water for
about one
second.
remove the
test strip
of water and shake.
Wait a
minute.
The strip
trial shows you
the level of hardness.
After determining the water hardness level:
1. When the program selection knob is in the “Off” position, press and hold the
Start/Pause/Cancel button and turn the program selection knob to the “1”
position within 5 seconds. After this time, the machine will go into regeneration
setting mode.
2. The regeneration level inside the memory lights up for 5 seconds once the
regenerator setting mode is activated.
3. To adjust the water hardness level, move the program selection button to the
position suitable for your hydraulic network. (see the “Water hardness level setting
table”
4. Press the Play/Pause/Cancel button once to save the level you have selected.
The machine returns to normal operating mode once the new setting has been
saved.
* Program selection knob rotates in 5 increments, independent of machine
programs.
5. Press the “Start/Pause/Cancel” button once to save the level you have
selected.
Water hardness level setting table
Level of
hardness
English degree
hardness of
water °dE
German degree
hardness of
water °dH
French degree
hardness of
water °dF
Location of
button
selection of
program*
Witness of
water hardness level
Level 0
0-5 0-4 0-8 1
First
level
The panel wash light comes on.
6-9 5-7 9-13 1
Second
level
10-15
8-12
14-22
2
The panel drying light comes on.
Third
level
16-19 13-15 23-27
3
The end indicator of the panel lights up.
Fourth
level
20-24 16-19 28-34
4
The washing, drying and end indicators
light up on the panel.
Fifth
level
The washing, drying and end indicators
flash at one second intervals on the
panel.
25-62 20-50 35-90
5
If the water hardness level is above 90°dF or if you use well water, it is
recommended to use special water purification devices and filters.
If the hardness level of the water you are using is below 13°dF, you do not have to
14 /44 EN Dishwasher / Instructions for use