Dishwasher / User’s Manual
35 / 53
EN
6
You can check your dishwasher and learn
about its status via your smart device with
the HomeWhiz function.
C
You can use your machine via
your smart device while the
function is selected. You can
monitor your machine through
the application when the
function is not selected.
C
You can check the indicator
on the product to see if the
function is enabled or not.
If the function is disabled, the
Wireless indicator will be off
or continuously flash at short
intervals. For example, when the
wireless connection setting is
off or the door of the machine
is open.
C
The function will be disabled
when the door of the
dishwasher is open or when
operations regarding On/Off are
performed on the machine. It
can be enabled again with the
remote control key.
The display when HomeWhiz is enabled.
HomeWhiz Setup and User
Account Settings
Install the HomeWhiz application from the
application store of your smart device to use
the WLAN function of your machine. Make
sure that your smart device is connected to
the internet to use the application.
If you are using the application for the first
HomeWhiz Function
time, complete the registration process with
your e-mail address on the application. Once
you've completed the registration process,
you can use all HomeWhiz supported
appliances in your house through this
account.
You can tap "Add/Remove Appliance"
under the "Appliances" section to see the
appliances paired with your account. You
can perform the user pairing processes of
these appliances from this page.
Initial setup
1 Tap "Add/Remove Appliance" section on
the HomeWhiz application.
2 Tap "Tap here to setup a new
appliance".
3. When the product is off, press the on/off
and remote start keys simultaneously
to enter the settings menu. Press the
selection key to set the product to
“wireless connection setup” status.
4. Then, in the settings section of your
smart device, connect to “HomeWhiz
xxx-xxxx” network under the Wireless
settings. Password of the network can
be seen on the HomeWhiz application.
5. Connect your smart device to the
HomeWhiz network and return to
the HomeWhiz application. On the
application, you can see the dishwasher
you are adding. Tap Next to proceed to
the next step.
6. Select the network to which you want
to connect your dishwasher and enter
the password.
7. While the dishwasher is connecting to
the selected network, you will see the
Wireless icon ( ) flashing. Once the
connection has been established, the
said icon will become on permanently.
