Dishwasher / User’s Manual
15 / 41
EN
Preparation
C
Since different salt brands
in the market have different
particle sizes and since the
water hardness may vary,
dissolution of the salt in water
may take a couple of hours.
Therefore, Salt Indicator
remains on for a while after
adding salt into the machine.
Loose salt grains can cause rust
marks in your machine if not
rinsed away. Only fill salt just
before a programme is run.
Detergent
You can use powder, liquid/gel and tablet
detergents in the machine.
C
Only use the detergents
produced particularly for use
with dishwashers. Never
use washing up liquids. We
recommend you not to use
detergents that contain
chlorine and phosphate as
they are harmful for the
environment.
Adding detergent
C
Refer to the “Programme
Table” to determine the correct
amount of detergent for the
selected programme.
C
In order to have good washing
and drying results, always
follow the instructions on the
detergent packaging. If you
have further questions, we
recommend to contact with the
producer of the detergent.
3. Fill the salt reservoir with salt by using
salt funnel (D). To speed up dissolution
rate of salt in water, stir it with a
spoon.
C
You can put about 2 kg of
dishwasher salt into the salt
reservoir.
4. Replace the lid and tighten it securely
when the reservoir is full.
5. If you will not start a washing
programme immediately after adding
the salt, run the machine empty in the
shortest programme to dissolve and
wash away the scattered salt in the
machine.
