Beko DIN-5834 Скачать руководство пользователя страница 30

Страница: 30 / 42

new programme following the

cancellation of the programme.

There might be residues of

detergent or rinse aid left in the

machine and/or on the pieces

being washed depending on the

step the previous programme was

in at the time of such cancellation.

Changing a programme

1. Press Start / Pause / Cancel key

to switch the machine into Pause

mode.

2. Select the desired programme by

pressing the Programme Selection

key.

3. Press Start / Pause / Cancel key to

start the new programme.

The new programme will start from

the step where the previous one

has stopped. For example, if the

previous programme has remained

in rinsing step, the new programme

will start from the rinsing step as

well. If you want to run the newly

selected programme from the very

beginning, you have to cancel the

programme first and then select a

new programme.

Salt indicator

Check the Salt indicator on the display

to see whether there is enough

softening salt in your machine or not.

You need to refill the salt container

whenever the Salt indicator lights.

If the water hardness level is saved

as (r1), Salt indicator will never

come on even if the salt container

is empty. (Adjusting the water

hardness level is explained in

Water Softening System section.)

Rinse Aid indicator

Check the Rinse Aid indicator on the

display to see whether there is enough

softening rinse aid in your machine

or not. You must refill the rinse aid

container when the Rinse Aid indicator

comes on.

If the Rinse Aid indicator is set

to OFF, Rinse Aid indicator will

never come on even if the rinse aid

container is empty.

Setting the Rinse Aid indicator

1. Turn on your machine by pressing

On / Off key while pressing and

holding the Half Load ( ) key

when the machine is in off position.

Keep holding the keys pressed in

this stage.

2. Release On / Off (1) key while

pressing and holding the Half Load

( ) key.

3. Keep the Half Load (

) key

pressed for three seconds more.

4. Rinse Aid indicator lights up and

the Rinse Aid indicator status

saved on your machine appears on

the display as “ON” or “OFF”.

5. You can change the status of the

indicator as “ON” or “OFF” by

pressing the Start / Pause / Cancel

key.

If you switch off the machine with

“On/Off" key when the status is

"ON", then the Rinse Aid indicator

will come on when the rinse aid

level in your machine becomes low

while the machine is in use. If you

switch off the machine by pressing

On/Off key when the status is set

to OFF, then the Rinse Aid indicator

will never come on.

Содержание DIN-5834











































Результаты поиска

Содержание DIN-5834

Отзывы:

Похожие инструкции для DIN-5834

Бренды по названию

Популярные бренды

Beko DIN-5834, Руководство пользователя

Результаты поиска

Содержание DIN-5834

Отзывы:

Похожие инструкции для DIN-5834

Бренды по названию

Популярные бренды