27
EN
Programme selection
1. Press On / Off key to turn on your
machine.
2. Refer to “Table of Programme Data
and Average Consumption Values”
to select a washing programme
suitable for your dishes.
3. Press Programme Selection key
repeatedly until the number of
the selected programme appears
on the Programme indicator
. Programme number
will increase by one each time you
press the key.
C
Number of the programmes on the
machine may change depending
on the model you have purchased.
Adding an auxiliary function
to the programme
Depending on your needs, you can
add Half Load (1/2), Tablet Detergent,
Express and Time Delay functions to
the programme you have selected.
Press the key of the function you
wish to add. Indicator of the relevant
function will appear on the display.
Setting Time Delay function
If an economical electricity tariff is
applied in your region, you can use
the Time Delay function to wash your
dishes during appropriate hours.
1. Press the Time Delay function
key after selecting the washing
programme and other auxiliary
functions. Time Delay indicator ( )
will start flashing on the display.
2. Press Time Delay key to set the
time you wish. Time will increase
with increments of 30 minutes up to
24 hours every time you press the
key.
3. Press Start / Pause / Cancel key.
Delay time will start countdown.
Time Delay indicator ( ) and
Start / Pause indicator will light
continuously. Remaining time will
appear on the Time Delay indicator.
Programme will start automatically
when the countdown is over.
Changing the settings during Time
Delay
While the Time Delay function is
activated, you can make changes
in the washing programme, other
auxiliary functions or the delay time.
1. Press Start / Pause / Cancel key
to switch the machine into Pause
mode. Countdown will stop.
2. Select the new programme,
auxiliary functions and time as
described in the sections above.
3. Press Start / Pause / Cancel key.
Countdown will resume or restart.
Canceling the Time Delay function
1. Press and hold Start / Pause /
Cancel key for 3 seconds.
2. Release the key when the Start /
Pause indicator starts flashing. For
a couple of minutes the machine
will fulfill the necessary operations
required to cancel the function.
Once the Time Delay function is
cancelled, “00:00” will appear on
the Remaining Time indicator.
C
You can select and start a
new programme following the
cancellation of Time Delay function.
C
Time Delay function can not be set
after the programme starts.
Starting the programme
To start your machine after selecting
the programme and auxiliary functions,
press Start / Pause / Cancel key.
Once the programme starts to run,
Remaining Time indicator displays
Содержание DIN-5834
Страница 1: ...DISHWASHER ...
Страница 42: ...EN 17 7767 01 00_AG_YM ...