16 EN
Sensor
There are humidity sensors in your dryer that detect
whether the laundry is dry or not.
To clean the sensor:
1. Open the loading door of the dryer.
2. Allow the machine to cool down if drying has been
carried out.
3. Wipe the metal sensors with a soft cloth, dampened
with vinegar and dry them.
C
Clean metal sensors 4 times a year.
A
Never use solvents, cleaning agents or similar
substances when cleaning since these materials can
cause fire and explosion!
5
Maintenance and cleaning
Filter Cartridge / Door Inner Surface
Lint and fibres released from the laundry to the air during
the drying cycle are collected in the “Filter Cartridge”.
C
Such fibre and lint are generally formed during
wearing and washing.
C
Always clean the filter and the inner surfaces of the
cover after each drying process.
C
You can clean the filter and filter area by vacuum
cleaner.
To clean the filter:
1. Open the loading door.
2. Remove the cover filter by pulling it up and open the
filter.
3. Clean lint, fibre, and cotton raveling by hand or with a
soft piece of cloth.
4. Close the filter and place it back into its
seat.
C
Clogging may arise on the filter surface after using
your machine for some time; if this occurs, wash the
filter with water and dry it before using again.
C
Clean the entire inner surface of the cover and door
gasket.
