Beko CLEARPOINT M010 Скачать руководство пользователя страница 12

Страница: 12 / 56

3. Transport and storage

WARNING

Insufficient qualification!

If personnel have insufficient qualifications, this may result in accidents, personal injury and

property damage as well as operating disruptions while working on the product.
The work on the product described in the following may only be carried out by transportation

and storage technicians and must be documented.

CAUTION

Improper transportation or storage!

Improper transportation or storage may result in personal injury or property damage.
• Always wear gloves when working with packaging materials.

• Use personal protective equipment, check it regularly for proper function and replace

damaged parts promptly.

• The product must only be transported and stored by transportation and storage technicians.

• Handle the packaging and product carefully.

• Package all parts with suitable materials in a shock-resistant manner.

• Transport and handle packaging according to the label (observe hoist attachment points and

center of gravity, keep alignment vertical, do not throw, etc.)

• Use proper, functional transportation equipment and hoists.

• Observe permitted transportation and storage parameters.

• Do not store the product exposed to direct sunlight and heat sources.

NOTICE

Handling packaging materials!

The improper disposal of packaging materials may result in environmental damage.

• The packaging material is recyclable.

• Dispose of packaging materials in accordance with the regional laws, directives and

guidelines of the country of use.

NOTICE

Transportation and storage notices!

The product must

• be stored in the original packaging in a closed, dry, and frost-free room. The ambient

conditions, transportation and storage parameters may not exceed or fall below the

information in the Technical Data chapter.

• Even when packaged, protect the device against the elements.

• While in storage, secure the device so that it cannot topple over or fall, and protect it

against vibration.

CLEARPOINT

Water separator

Installation and operation instructions

12 | 56

Содержание CLEARPOINT M010

























































Результаты поиска

Содержание CLEARPOINT M010

Отзывы:

Похожие инструкции для CLEARPOINT M010

Бренды по названию

Популярные бренды

Beko CLEARPOINT M010, Инструкция по установке и эксплуатации

Результаты поиска

Содержание CLEARPOINT M010

Отзывы:

Похожие инструкции для CLEARPOINT M010

Бренды по названию

Популярные бренды