Beko CLEARPOINT 3eco M010 Скачать руководство пользователя

Страница: 44 / 56

12. Disposal

12.1 Warning

DANGER

Use of incorrect accessories, materials or spare parts!

The use of incorrect spare parts, accessories or installation materials, as well as auxiliary and

operating materials, may result in death or serious injury. In addition, functional and operational

malfunctions or material damage can occur.
• For all disassembly work, only use undamaged original parts, auxiliary and operating

materials which are specified by the manufacturer.

•

Only use fittings and connecting elements approved for the respective application as well as

suitable tools in perfect operating condition.

NOTE

Inappropriate disposal!

Inappropriate disposal of parts and components, operating and auxiliary materials as well as

cleaning media can cause environmental damage.
• Dispose of all parts and components, operating and auxiliary materials as well as cleaning

media professionally and in accordance with regional legal provisions, regulations and

requirements.

• In case of uncertainties regarding disposal, always consult a regional waste management

company.

12.2 Disposal work

At the end of its useful life, the product must be disposed of properly e.g. by a specialist company. Materials as glass,

plastics and some chemical compounds are mostly recoverable, reusable, or recyclable.

All national and local regulations must be kept during disposal.

Used filter element:

Waste key: 150203

Adsorption and filter materials; cleaning wipes and protective clothing with the exception of those classified by 150202

Used float drain

Do not dispose of as household waste! Disposal must be carried out properly and in line with environmental

requirements.

CLEARPOINT

eco

coalescing filter

Installation and operation manual

44 | 56

Содержание CLEARPOINT 3eco M010

























































Результаты поиска

Содержание CLEARPOINT 3eco M010

Отзывы:

Похожие инструкции для CLEARPOINT 3eco M010

Бренды по названию

Популярные бренды

Beko CLEARPOINT 3eco M010, Инструкция по установке и эксплуатации

Результаты поиска

Содержание CLEARPOINT 3eco M010

Отзывы:

Похожие инструкции для CLEARPOINT 3eco M010

Бренды по названию

Популярные бренды