Beko BEKOMAT 8, Инструкция по установке и эксплуатации

Страница: 16 / 28

Installation and operation manual
EN
16 BEKOMAT
®
8/9
4. Electrical installation
4.1. Installation instructions
DANGER Insufficient qualification
Inappropriate handling due to insufficient qualification can lead to serious property damage and
personal injuries or death.
• All the tasks described in this installation and operation manual may only be carried out by skilled
technical personnel¹ with the qualifications described below.
• The skilled technical personnel¹ must have read and understood the contents of the installation and
operation manual before carrying out any tasks.
DANGER Mains voltage
Risk of electric shock with serious or even fatal injuries if contact is made with non-insulated, live
components.
• Observe all applicable regulations with respect to electrical installations (e.g. VDE 0100 / IEC 60364).
• Only execute installation and maintenance work when the system has been de-energised.
• Electrical work may only be carried out by authorised skilled technical personnel
1
.
1
Skilled technical personnel
Skilled technical personnel are people who, due to their professional qualification and knowledge in the field of measuring,
control and pneumatic technology, and their knowledge of the applicable statutory regulations, guidelines and standards are in
a position to independently foresee potential dangers in relation to the use of the device and who are qualified to perform the
tasks described in this manual. Special assembly conditions e.g. aggressive media require additional knowledge. In addition, the
requirements on “skilled technical personnel” set out in the Technical Rules for Operating Safety (TRBS) must be observed. It is the
responsibility of the device/plant owner to ensure that the instructions in this manual are adhered to.
4.2. Power supply
Open the top cover:
• Loosen 4 screws
•
Lift top cover off
For mains connection (or alarm tapping): Loosen the screwed cable gland(s) on the
bottom cover
1
Mains/Power Alarm