Beko BEKOMAT 8, Инструкция по установке и эксплуатации

Страница: 8 / 28

Installation and operating manual
EN
8 BEKOMAT
®
8/9
1.5. Intended use
The BEKOMAT
®
is an electronically level-controlled condensate drain for compressed air systems. It is able to drain condensate
from the plant components at operating pressure and with virtually no compressed air loss.
• The device must only be operated when equipped with original spare parts and accessories.
•
Do not install the BEKOMAT
®
8/9 in areas with a potentially explosive atmosphere.
• Permissible media: condensate, oil-contaminated or oil-free
Operate the BEKOMAT
®
only for the intended purpose and within the limit ranges specified in the technical data. Do not operate
the device with any media (fluids, gas/vapour mixtures) other than those listed above. Any other use of the device is deemed
improper and poses a risk to persons, property and the environment.
1.6. Warranty and liability
All warranty shall be voided, if the BEKOMAT
®
is used improperly, for a purpose other than the intended or is operated outside the
limits specified in the technical data. In such cases, the manufacturer shall also reject any liability for damages. Improper operation
includes:
• Incorrect installation, commissioning or operation; insufficient maintenance
• Operation with defective components
•
Non-compliance with the instructions in this document, in particular the safety instructions
• Modification of the device
• Use of third-party spare parts that have not been approved by the manufacturer