Beko BEKOMAT 8, Инструкция по установке и эксплуатации

Страница: 5 / 28

EN
Installation and operating manual
BEKOMAT
®
8/9 5
1.3. General safety instructions
DANGER Insufficient qualification
Improper handling and operation of the device might result in serious or even fatal injury, and/or
serious damage to property.
• All tasks described in this installation and operating manual must be performed by specialist
technical personnel
1
who meet the criteria outlined below:
• Before carrying out any work with or on the device, all specialist technical personnel¹ must have read
and understood the contents of this installation and operating manual.
DANGER Escaping compressed gas
Risk of serious or even fatal injury from suddenly released compressed gas or condensate at
bursting and/or unsecured device components.
• Before carrying out any assembly, installation or maintenance work, depressurise the system. All
electrical work must be carried out by authorised specialist technical personnel
1
.
• Use only pressure-resistant installation materials and suitable tools that are in proper working order.
• Before pressurising the system, check all unit parts and repair them, if necessary. Open valves slowly
to prevent pressure blows during operation.
• Make sure that no persons can be injured or objects can be damaged by condensate or escaping
compressed gas.
• Protect the device parts against vibration and impact.
• Perform a leakage test.
DANGER Mains voltage
Risk of serious or even fatal injury from electric shock when coming into contact with non-insulated,
powered components.
• For the electrical installation of the device, adhere to all applicable regulations (e.g. VDE 0100 / IEC
60364).
• Before carrying out any maintenance work, de-energize the system.
• All electrical work must be carried out by authorised specialist technical personnel
1
.
WARNING Operation of device outside limit range
If the specified limits are exceeded, there is a risk of device malfunction, potentially resulting in
injury and/or damage to property.
• The device must only be operated for the intended purpose and within the permissible limits
specified on the type plate and in the technical data.
• Strictly adhere to the prescribed operating times and maintenance intervals.
1
Specialist technical personnel
Specialist technical personnel are persons who, due to their professional qualification and knowledge in the field of measuring,
control and pneumatic technology, and their knowledge of the applicable statutory regulations, guidelines and standards are in a
position to foresee potential dangers in relation to the use of the device and are qualified to perform the tasks described in this
manual. Special operating conditions (e.g. aggressive media) require additional knowledge. It is the responsibility of the device
owner to ensure that the instructions in this manual are adhered to.