Beko BEKOMAT 8, Инструкция по установке и эксплуатации

Страница: 20 / 28

Installation and operating manual
EN
20 BEKOMAT
®
8/9
6. Maintenance and servicing
DANGER Insufficient qualification
Improper handling and operation of the device might result in serious or even fatal injury, and/or
serious damage to property.
• All maintenance tasks must be performed by service personnel of BEKO TECHNOLOGIES GmbH or
an authorised BEKO partner.
Recommended interval: 1x per year
Wearing parts kit to be used:
BEKOMAT ® 8 2000450
BEKOMAT ® 9 4005382
Preparation:
• Close inlet
• Press TEST button until BEKOMAT
®
is depressurised
• Disconnect BEKOMAT
®
from power supply
6.1. Maintenance schedule
Maintenance Interval
Function test
• Press the TEST button
•
Visual inspection
daily
Maintenance
• Replace wearing parts (kit)
• Perform leakage test
• Perform function test
•
Check adhesive label and replace, if necessary
• Check valve core length
• Check cable connections
• Clean
annually
Function test:
We strongly recommend performing a daily function test of the BEKOMAT ® .
• To test the solenoid valve, press the test button briefly (for approx. 2 seconds).
 The BEKOMAT
®
starts a manual drain cycle.
• To test the alarm function, close the condensate inlet and press and hold the test button for approx. 1 minute.
 The BEKOMAT
®
starts a manual drain cycle and triggers an alarm.
During this test, large volumes of compressed gas might enter the condensate collection line.
Maintenance:
For more information regarding the maintenance of the device, contact the manufacturer.