EN
Installation and operating manual
BEKOMAT
®
3/6 CO Ex, 3/6 E Ex
27
EU_decl_BM03_06_EX_en_10_2017.docx
BEKO
TECHNOLOGIES GMBH
Im Taubental 7
41468 Neuss
GERMANY
Phone: +49 2131 988-0
www.beko-technologies.com
EU Declaration of Conformity
We hereby declare that the products named below comply with the stipulations of the relevant directives and
technical standards. This declaration only refers to products in the condition in which they have been placed into
circulation. Parts which have not been installed by the manufacturer and/or modifications which have been
implemented subsequently remain unconsidered.
Product designation:
Condensate drain
Type:
BEKOMAT
®
3 EX, 6 EX
Supply voltage versions:
12 VDC
Max. operating pressure
16 bar(g) (standard and BEKOMAT …F… )
25 bar(g) (only BEKOMAT 3EX…PN25, 6EX…PN25)
63 bar(g) (only BEKOMAT 3EX…PN63)
1,8 bar(a) (only BEKOMAT 3EX…VACU..,
6EX…VACU..)
Product description and function:
Condensate drain for electronically level-controlled
draining of condensate belonging to fluid group 2 in
compressed air networks in areas where it is likely that
an explosive atmosphere of gases, vapours or mists
occasionally occur.
Pressure Equipment Directive 2014/68/EU
(only BEKOMAT 6…)
Conformity assessment procedure applied in
accordance with Article 10 PED:
Module A, category I
Notified Body for the supervision of the quality
system:
DNV GL Business Assurance Zertifizierung und
Umweltgutachter GmbH, Schnieringshof 14,
45329 Essen
ATEX Directive 2014/34/EU
Applied standards:
EN 60079-0:2012
EN 60079-11:2012
Notified body:
DEKRA EXAM GmbH Dinnendahlstr. 9 44809 Bochum
Number of the type examination certificate:
BVS03ATEX E 214 X
EMC Directive 2014/30/EU
Applied standards:
EN 55011:2009 + A1: 2010, group 1, class B EN 61326-
1:2013
RoHS II Directive 2011/65/EU
The products meet the requirements laid down in European Directive 2011/65/EU concerning the restriction of the
use of certain hazardous substances in electrical and electronic devices.
The manufacturer shall have sole responsibility for issuing this declaration of conformity.
Signed for and on behalf of:
Neuss,
13/10/2017
BEKO
TECHNOLOGIES GMBH
i.V. Christian Riedel
Head of International Quality Management
