Beko Bekomat 14 Скачать руководство пользователя

Страница: 6 / 64

2.2 Responsibility of the operating company

The responsible operating company must ensure the following to prevent accidents, incidents and adverse effects on the

environment:
• Before all actions, check to ensure that the manual available does in fact belong to the product.

• The product and the accessories are used, serviced and repaired in accordance with the intended use.

• All applicable statutory requirements, safety regulations and accident prevention regulations are being adhered to.

• All regulations and operating guidelines for safe working and information regarding behaviour in the event of

accidents and fires are accessible at the operating location at all are times.

• The product and accessories are only used with the recommended and fully operable safety equipment.

•

All assembly, installation and maintenance work is carried out by qualified skilled technical personnel only.

• Personnel have the necessary personal protective equipment available and also use this equipment.

• Suitable technical safety measures are taken so that the permissible operating parameters are not exceeded or

undershot.

BEKOMAT

13, 13 CO, 13 CO PN25, 13 CO PN40

Original installation and operation manual

6 | 64

Содержание Bekomat 14

































































Результаты поиска

Содержание Bekomat 14

Отзывы:

Похожие инструкции для Bekomat 14

Бренды по названию

Популярные бренды

Beko Bekomat 14, Оригинальное руководство по установке и эксплуатации

Результаты поиска

Содержание Bekomat 14

Отзывы:

Похожие инструкции для Bekomat 14

Бренды по названию

Популярные бренды