Beko Bekomat 14, Оригинальное руководство по установке и эксплуатации

Страница: 36 / 64

10. Maintenance
10.1 Warning notices
DANGER
Pressure build-up in the pipework!
Death or serious personal injury can result through contact with fast or suddenly escaping
compressed gas or through bursting system parts.
• All work on the compressed gas system must be carried out in the depressurised state
and with the compressed gas system secured against unintentional pressure build-up.
• Set up a safety area around the working area during all assembly, installation,
maintenance and repair work.
• Before building up pressure in the pipework, check all pipe connections and tighten if
necessary.
• Slowly pressurise the system with pressure.
• Avoid pressure blows and high differential pressures.
• Assemble all pipelines without stress.
• Install pipes tightly as feed and discharge lines.
CAUTION
Inappropriate cleaning and use of the wrong cleaning media!
Inappropriate cleaning and the use of the wrong cleaning media may result in minor injuries
as well as damage to health and property.
• Never clean the device with a dripping wet cloth.
• Never use abrasive or aggressive cleaning agents or solvents which could damage the
outer coating (e.g. markings, type plate, corrosion protection, etc.).
• Never clean the device with hard or pointed implements.
• Use an anti-static, damp cloth for cleaning the outside.
• Immediately replace any product markings (pictograms, markings) that have become
illegible.
WARNING
Insufficient qualification!
Insufficient qualification of the personnel carrying out work on the product and accessories
can lead to accidents, personal injury and damage to property as well as impair operation.
• All work on the product and the accessories may only be carried out by skilled technical
personnel - customer service.
NOTE
Local hygiene regulations!
In addition to the cleaning instructions listed, any local hygiene regulations which are in
place must be heeded.
10.2 Maintenance schedule
Maintenance Interval
Wear parts exchange Annually
Cleaning work Annually
Visual inspection Weekly
Leakage test
At the end of all assembly work and maintenance and
servicing work on the product
BEKOMAT
®
13, 13 CO, 13 CO PN25, 13 CO PN40 Original installation and operation manual
36 | 64