Beko 8690842090431 Скачать руководство пользователя страница 6

Страница: 6 / 84

6 / 80 EN

Fully Automatic Coffee Maker / User Manual

Important instructions for

safety and environment

This section includes the safety instructions that will

help protect from risk of personal injury or property

damage. Failure to follow these instructions

invalidates the granted warranty.

1.1 Danger of electric current

Danger to life by electric current!

Contact with live wires or components could lead to

serious injury or even death!

Observe the following safety precautions to avoid

electric shocks:

•

Do not use the coffee machine if the connecting

cable or mains plug are damaged.

•

Before reusing the coffee machine, the mains

cable must be renewed by a qualified electrician.

•

Do not open the housing of the coffee machine.

Danger of electric shock if live connections are

touched and/or the electrical and mechanical

configuration is changed.

•

Before cleaning the bean container, remove the

mains plug of the appliance out of the socket.

Danger from rotating coffee mill!

Содержание 8690842090431





















































































Результаты поиска

Содержание 8690842090431

Отзывы:

Похожие инструкции для 8690842090431

Бренды по названию

Популярные бренды

Beko 8690842090431, Руководство пользователя

Результаты поиска

Содержание 8690842090431

Отзывы:

Похожие инструкции для 8690842090431

Бренды по названию

Популярные бренды