manualshive.com logo in svg

Beko 8690842090431, Руководство пользователя

Поделиться
Скачать
Beko 8690842090431 Скачать руководство пользователя страница 39

39 / 80  EN

Fully Automatic Coffee Maker / User Manual

5 

Operation and use

2.  Press the button 4 repeatedly 

until the required cup symbol 

for the desired ground coffee 

quantity is displayed.

4

 

3.  Place an appropriate cup under 

the coffee delivery spout (e.g. 

coffee mug).

4.  Fill the coffee powder shaft 

with fresh powdered coffee.

5.  Press “   ” (button 6) and keep 

it pressed until the desired cup 

filling amount is reached.

6

6.  Release the button. The 

desired cup filling level is now 

stored.

C

Repeat the 

procedure if you also 

wish to change the 

filling level for the 

other cup sizes.

C

All values remain 

stored even when 

the coffee machine is 

switched off. Should 

you change your cup 

size, you can adapt 

the cup filling level 

individually at any 

time.

C

The stored cup 

filling levels for 

each individual cup 

symbol only applies 

in powder mode.

5.14 Preparing 

coffee specialities

The milk system must be connected 

in order to dispense coffee 

specialities.
More information can be found in 

chapter 4.4.

C

Do not use soya or 

rice milk because 

good frothing results 

are not possible with 

these products.

Содержание 8690842090431





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды