Dryer / User Manual
EN 5 / 36
1.1.1 Electrical safety
A
Electrical safety instructions should be followed while electrical
connection is made during the installation.
• Connect the dryer to a grounded outlet protected by a fuse at the value
specified on the type label.
(See 2.1 Overview)
Have the grounding
installation performed by a qualified electrician. Our company shall not
be liable for any damages that will arise when the dryer is used without
grounding in accordance with the local regulations.
• The voltage and allowed fuse protection is stated on the type label plate.
(See 2.1 Overview)
• The voltage specified on the type label must be equal to your mains
voltage.
(See 2.1 Overview)
• Unplug the dryer when it is not in use.
• Unplug the dryer from the mains during installation, maintenance,
cleaning and repair works.
• Do not touch the plug with wet hands! Never unplug by pulling on the
cable, always pull out by grabbing the plug.
• Do not use extension cords, multi-plugs or adaptors to connect the dryer
to power supply in order to decrease the risk of fire and electric shock.
• Power cable plug must be easily accessible after installation.
B
Damaged mains cable should be changed by an Authorised
Service agent.
B
If the dryer is faulty, it must not be operated unless it is repaired
by an authorised service agent! There is the risk of electric shock!
Содержание 5023790037174
Страница 1: ...Condenser Sensor Dryer DHY 7340 W DHR 73431 W ...
Страница 35: ......
Страница 36: ...Beko plc Beko House 1 Greenhill Crescent Watford WD18 8QU ...