BEKA BA377E, Руководство пользователя

Страница: 19 / 62

19
6.2 Controls when configured as a Timer
The BA377E is controlled and configured via four
front panel push buttons. In the display mode i.e.
when the instrument is displaying time the push
button functions are:
Push Button Functions
&
When local control is enabled starts
the Timer. See 6.5.8
*
When local control is enabled stops
the Timer. See 6.5.8
)
+
*
Shows the grand total (run time) in
hours and tenths of an hour
irrespective of Timer configuration.
If buttons are held for longer than
ten seconds the grand total may be
reset to zero if the grand total reset
sub-function
clr gtot
is enabled in
the
LoC r5Et
configuration function.
See 6.5.20
To reset the grand total to zero from
the display mode press the
)
+
*
buttons for ten seconds until
CLr. no
is displayed, using the
&
or
*
button change the display to
CLr.
YE5
and press
)
.
&
+
*
Resets the Timer to zero or to the
set time
5Et t
depending on
whether the Timer is configured to
time-up or time-down when the two
buttons are operated
simultaneously for more than two
seconds. This is a configurable
function. See 6.5.19
(
+
*
When enabled in the configuration
menu, operating these two buttons
simultaneously provides direct
access to the set time
5Et t
and
allows adjustment when the timer is
in the display mode. See 6.5.15
(
+
&
Shows in succession, firmware
version number, instrument function
elap5e
and any output accessories
that are fitted:
-A
Dual Control Outputs
(
+
)
Access to configuration menu