Beka Hospitec 921077000, Оригинальное руководство

Страница: 53 / 60

Appendix
Operating manual NORA Pro V0.1 E Page 53 of 60
13.6.3 Replacing the control unit with holder for the battery unit
Image 1:
Required tools:
1 slotted
screwdriver
1 cross-head-
screwdriver (PH1)
Image 2:
Additional parts:
1 control unit incl. 2
screws M4x16
Image 3:
Disconnect the
NORA Pro from the
power supply by
activating the
emergency stop
button. Remove the
battery as described
in chapter 13.6.1.
Image 4:
Open the
connection flap and
disconnect all plug
connections from
the control unit:
- Hand control
- Lifting motor
- Spreader motor
- Charging plug, if
applicable.
Image 5:
The picture shows
all removed plug
connections.
Image 6:
Loosen and remove
the screws with
cross-head
screwdriver (PH1).
Image 7:
Pull the control unit
upwards out of the
holder.
Image 8:
The picture shows
the back of the
removed control
unit and the
mounting plate on
the NORA Pro.
Re-assemble in reversed order!