Beka Hospitec 921077000, Оригинальное руководство

Страница: 29 / 60

Operation
Operating manual NORA Pro V0.1 E Page 29 of 60
Check that the sling attachment points at the sit-to-stand lift match the sling clips.
Check that the sling is not twisted when attaching the sling. Always check that the
sling clips are correctly attached prior to and during the lifting procedure and that they
are tensioned while supporting the patient’s weight.
Please take extreme care when using the sling and encourage the patient to hold on
tight to the handles of the spreader bar.
8.1.2.1 Safely attaching the clips to the support
Always check that the fastening clips are secured and correctly positioned prior
to lifting the patient/resident!
8.1.2.2 Safely attaching the slings
Step 1
Carefully lower the
spreader bar by
pressing the “down”
button of the hand
control, until you can
slide the slings over
the attachment
hooks.
Step 2
Pull the sling over
the attachment
hook.
Step 3
Make sure that the sling is
pulled to the end of the
attachment hook (refer to
“Final position”)!
Always check that the clips or the slings are secured and located in the right
position before your start lifting your patient!
hook in pull
secure
X

