04
Do not use a loose or faulty electrical outlet.
• Doing so could cause a fi re or a short.
• Plugging too many plugs into the same outlet, for example using outlet splitters, can cause fi re
due to heat.
Do not use any power supply other than the one specified.
AC 120 V, 60Hz
• Doing so could cause a fi re or excessive heat.
Do not stick a finger or anything else into the warm air outlet.
Do not place anything on the warm air outlet or drape clothes over it.
Beware of low-grade burns
• Improper use of heated toilet seats could cause a low-grade burn.
When sitting for a long time on the toilet seat, switch the toilet seat temperature adjustment to
"OFF".
When any of the following persons use a heated seat or warm air drying, someone should switch
the toilet seat temperature adjustment to "OFF" and switch the drying air temperature to "Low".
-Young children, the aged and other users unable set the temperature appropriately themselves
-The ill, physically disabled and others who do not have freedom of movement
-Those using any medicines that cause drowsiness (sleeping medicine or cold medicine), those
who have been drinking heavily, anyone severely fatigued and anyone else liable to fall asleep
Always connect the Washlet to the cold water supply.
• Connecting to hot water supply may result in burns and equipment damage.
Make sure that a properly grounded (3 prong) outlet has been installed.
• Failure to install a grounded outlet could cause electrical shock in the event of a malfunction or
short circuit.
Do not unplug by pulling the cord.
To unplug, hold the plug, not the cord.
• Pulling on the cord may cause damage and result in fi re or heat.
This is an electrical product. Do not install it anywhere water is likely to
get on the product or anywhere with humidity high enough that water is
likely to form on the surface of this product. When using the product in a
the bathroom.
Do no use any outlet or wiring equipment beyond its specified rating
bathroom, install a fan or ventilation port and ensure good air flow through