Water Supply Hose and intelligent toilet body installation
Water supply hose and water diversion
valve
installation:
①Close the water Supply valve and
remove the water supply hose
connected to the ceramic;
③Install the water diversion valve on
the water supply valve;
④Install the ceramic-connected inlet
pipe on the water diversion valve.
Note：
Be sure to tighten it during installation, otherwise it may cause water leakage.
Make sure that the O-ring part of the water
supply hose is not attached with dust, and
insert it straight into the connection part on
the body side.
Note:
Make sure that the front of the water supply hose
is equipped with an O-ring.
Do not cut the water supply hose.
Do not use the old water supply hose, otherwise it
will leak due to aging.
Do not allow the water supply hose to be
scratched by sharps.
The water supply hose must be inserted straight to
avoid the O-ring being engaged by the body
connection.
Body
connector
O-ring
Water supply hose
A
10
②
Install adapters at both ends of the
water diversion valve;
Water diversion
valve
Gasket
Water supply valve
Water Supply Hose
To the
smart toilet
To ceramics
Adapter
Gasket
Adapter
