6.4.5.5
Global Parameters
–
Tap the symbol for “Main Menu”.
The display changes to main menu.
–
Tap the symbol for global parameters.
The display changes to the
global parameters.
–
Select the desired
parameter with the arrow keys.
–
Tap the symbol “
E
” in order to adopt the selection
.
–
Changing the value.
–
Tap the symbol “
P
” in order to save the selection.
Parameter 29:
Upper feed maximum track (option
of stepper motor)
Parameter 38:
Delayed start of light barrier
Parameter 39:
Differential feed (option of stepper motor)
Maximum track
Parameter 40:
Base value for upper feed (option of stepper motor)
Parameter 42:
Base value for differential lower feed
(option of stepper motor)
Parameter 45:
Number of stitches before table blowing
is switched on.
Parameter 46:
Duration of the stacker impulse
Parameter 48:
Max. speed
Parameter 49:
Speed during warp thread separation
Parameter 50:
Number of stitches before thread tensioning
is opened (seam end).
Parameter 52:
Speed of roll-out device
Parameter 54:
Impulse duration of retracted mouse
Parameter 55:
Time until after the roll-out device is lifted on the
transport unit.
Parameter 58:
Display of the software version
Parameter 59:
Number of stitches, for the length of which the
roll-out device
suctions the thread chain (seam start)
Parameter 65:
Thread tension lift
43
1
Содержание 1281/5-1
Страница 39: ...35 1 ...
