Beisler 1281/5-1, Руководство по эксплуатации

Страница: 41 / 62

Switching on the fullness regulation
–
Tap the symbol 3.
The display is inverted.
–
The fullness regulation is therewith enabled and is also displayed
in inverted image on the main screen on exiting the fullness
regulation.
Programming the stitches and quantities
–
Tap on the symbols for the stitches “6” or Item “5”.
The display changes to input mode.
–
Enter the desired values.
–
Save the values with the key “ P ”.
The display changes back to fullness regulation.
Machine with fullness regulation by means of cylinder
–
Tap on the symbol for the segment 2 .
The display appears inverted.
In segment 2 , fullness is switched on by means of
the number of programmed stitches
.
Machine with fullness regulation by means of stepper motor
–
Tap on the symbols 1, 3, 5
.
The display appears inverted.
–
The segments 1, 3, 5 are switched on for the
quick adjustment in the main view
.
ATTENTION !
The following must be borne in mind while working with fullness by
means of stepper motor:
The enabling of the fullness always applies to all 5 segments.
37
1