Beisler 1281/5-1, Руководство по эксплуатации

Страница: 20 / 62

Inside
seam M 01 4_6
1) Select the seam program at the operating panel (see Chapter 6.3).
2) Lay out and adjust the trouser parts on the positioning table.
3) Insert the trouser parts in the mouse.
4) Close the mouse.
5) Insert the trouser parts under the sewing foot up to the point that
the feed dogs securely grasp the trouser parts.
6) With the left hand, hold the trouser parts to be sewed.
7) With the right hand, grasp the trouser parts to be sewed such that
the middle finger is below the lower trouser part, the index finger is
between the two and the thumb is on the upper trouser part.
8) Step on the forward pedal.
The sewing operation is performed automatically.
9) The transport puller is lowered and transports the workpiece.
- At the seam end, the roll-out device is lowered in order to
secure chain separation and
prevent the trouser parts from sliding.
The completely sewed trouser parts are destacked.
16