Beisler 1220/5, Руководство по эксплуатации

Страница: 36 / 69

Maintenance work Explanation Operating
to be done hours
Machine head
- Remove sewing dust and thread
remainders.
(e.g. with compressed air pistol)
Clean the entire area 1 of the thread
guides under the fabric sliding sheet 8
Suction device Empty container 2 of the suction device
- Turn the bottom part of the container to
the left and remove it
- Empty the container
- Screw the bottom part on again in
clockwise direction
8
Pneumatic system
- Check the water level in the
pressure regulator 3
- Clean the filter insert 4
- Make leak test of the system
The water level must not rise up to the
filter insert 4.
- Let the water run out of the water
separator under pressure after pressing
the drain plug 5.
The filter insert 4 separates dirt and
condensed water.
- Separate the sewing unit from the
compressed air net.
- Push in drain plug 5.
The pneumatic system of the
sewing unit has to be pressureless.
- Screw the water separator 6 off
- Remove filter insert 4.
Wash the dirty filter tray and the filter
insert with benzine (no solvent!)
and blow them clean.
- Reassemble the water separator
and connect the maintenance unit.
40
500
500
32