Beisler 1220/5, Руководство по эксплуатации

Страница: 14 / 69

5. Operation of the sewing unit
5.1 Feeding the trousers parts and starting the sewing process
The overlock unit 1220/5 works semi-automatically.
The operator of the sewing unit has to do the following:
l
call up the desired seam program;
l
feed the material precisely;
l
supervise the sewing process of the unit;
l
remove the finished parts from the stacker.
Feeding the trousers part and starting the sewing process
1) Select the seam program at the control panel (see chapter 6.3).
2) Position the trousers part 1 from the right on the table top 2 and
under the contour guide 3.
ATTENTION!
As soon as the trousers part is pushed under the light barrier 5, the
sewing process starts automatically and the contour guide 3 lowers.
3) The trousers part is sewn.
4) As soon as the workpiece has left the light barrier 5, the seam
is finished and the stamp 4 lowers.
5) The contour guide 3 moves upward.
6) The stacker clamp moves to the front.
7) The stamp 4 moves upward again.
8) The trousers part is stacked with an air blast.
10
4 3 2 1
5 3