Beisler 1220/5, Руководство по эксплуатации

Страница: 21 / 69

6.4 Adjusting the control
The parameter values are altered in the individual parameter menus.
–
Press key “ P ”.
–
Select the menu item.
–
Select the parameter to be altered with the keys “ F1 ” or “ F2 ”.
–
Press key “ E ”.
–
Alter the parameter value with the keys “ Plus ” or “ Minus ”.
–
Press key “ P ”.
The new parameter value is stored.
–
Press key “ P ”.
You return to the selection menu
–
Press key “ P ”.
You return to the sewing program
6.4.1 Altering seam-specific parameters
Auxiliary roller
Via this parameter the auxiliary roller is adjusted.
Parameter 13: Number of stitches when the auxiliary roller lowers.
Setting range: 0 …400 stitches
Parameter 14: Number of stitches how long the auxiliary roller
remains lowered.
Setting range: 0 …300 stitches
Adjusting the holding stamp
Via this parameter the holding stamp is adjusted.
Parameter 15: Number of stitches when the stamp lowers.
Setting range: 0 …20 stitches
Parameter 16: Number of stitches how long the warp separator
remains switched on.
Setting range: 0 …100 stitches
Parameter 17: Switch the stacker on or off
Setting range: 0 … 2000
Parameter 57: Time how long the holding stamp is down.
Setting range: 0 / 1
1
17