Page 5
If the appliance does not turn on.
Check the battery is charged. If not, recharge it.
The battery is not recharging.
Check voltage is arriving from the power supply.
In the event other problems arise, directly contact a specialist and/or authorised technician or your BEINAT
S.r.l. dealer.
T emperatu re
Measurement range -50+100 °C
Precision 1% F.S
Resolution
0.5 °C
Temperature Readings
These operations must be carried out in compliance with the methods described in this manual. Remember,
measurements taken with batteries in need of recharge can give false measurements
THERMOMETER FUNCTION.
Press the button, followed by the “Temp” function button.
THERMOMETER Function.
Press the “Temp” button to access the thermometer function.
When the instrument is turned on it starts to read the room temperature.
Lift the probe up, by turning it, for maximum reading precision.
SWITCH OFF. Press the OFF button for 5 seconds.
Problems and Solutions
Thermometer Function Components and Commands
Battery charger status display
The display depicts a battery.
When the battery is charged the figure is
completely black and as it is used it becomes white.
It flashes when it needs to be recharged..
Thermometer Display
Measurement display:
from -50 to + 100 °C
22
°C
Press Temp
MT
Press+ Press -
100
