Page 2
To achieve long, satisfactory use of the MT digital appliance, use and store it in compliance with the following
precautions.
ENSURE the detector is intact after removing it from the packaging.
Any use other than the designed use of the detector is considered improper and BEINAT S.r.l. declines all
liability for any damage caused to people, animals or property.
Do not allow it to get wet.
The MT is not waterproof and can be seriously damaged if immersed in water or exposed to high levels of
humidity.
Do not drop it.
Heavy knocks on hard surfaces and strong vibrations can damage the machine.
Avoid strong magnetic fields.
This detector should not be used or stored near radiation or strong magnetic fields. Static electricity or magnetic
fields generated by devices such as radio transmitters can cause interference during measurements.
Avoid abrupt temperature fluctuations.
Sudden temperature variations can cause condensation and the batteries could supply lower voltage.
Over a certain temperature (circa + 45°C) the monitor becomes black. To restore visibility place it in a fridge
for a few minutes to allow it to cool.
Cleaning
Never clean the appliance using chemical products. If necessary, wipe with a damp cloth.
Read the following safety precautions carefully to avoid damaging the product or personal or third party
injuries, before using the MT appliance
Keep them safe so they are available for consultation by anyone before using the appliance.
Immediately turn off the appliance in the event of malfunctioning.
In the event you detect smoke or a pungent or unusual odour coming from the appliance or power supply
(optional accessory):
Immediately turn off the detector; disconnect the power supply from the mains, if connected to charge the
battery, and send to the nearest Service Centre.
Do not try to dismantle the appliance.
Contact with internal components of the detector can cause injury. In the event of faults, the product should
only be repaired by qualified personnel.
If the device is broken due to a fall or crash, consult the Service Centre for the necessary repairs.
Observe due precautions while handling the Lithium Polymer battery.
The
battery must never be exposed to high temperatures, that is, over + 45°C. To ensure an optimum
service life, use it at room temperature.
If used at low temperatures, the service life could be diminished.
Never dismantle the battery and never throw it on a fire as it may explode.
Never dispose of the battery as normal waste. Comply with local regulations on its disposal.
Use the correct cables supplied.
To ensure the product complies with standards, for terminal input and output connection only use the cables
supplied for this purpose or those sold separately by BEINAT S.r.l.
Avoid contact with liquid crystals.
In the event the display breaks, pay attention not to injure yourself with the glass fragments and avoid the
liquid crystals coming in contact with your skin, eyes or mouth.
For your safety
Conversion table for pressure
Units of Symbol Pa
hPa bar
mbar
at
mmH
2
O
Measures
Pascal
ect Pascal
ba r
mi ll ibar
mi ll imeter
H
2
O
Pa
hPa
bar
mbar
at
mmH
2
O
100.000
1.000
100
1
0,01
100.000
1 0
0,00001
0,01
1
1
1.000
0,01
0,001
1
0,001
1
0,0001
1.000
0,01
1
1
1.000
0,1
0,00001
0,0001
0,0001
0,001
1
1
10.000
10.000
1
0,1
1 0
1 0
PSI
PSI
0 . 0 1 4 5 0 3 8
0 . 0 1 4 5 0 3 8
0 . 0 0 0 1 4 5 0 3 8
0. 00145038
1 . 4 5 0 3 8
1 . 4 5 0 3 8
Technical
Atmosphere
