4
2.The Spray indicator light will be bright after connecting the mist maker with power supply,then
the ultrasonic atomizer will work.
If the spray lights flash and the atomizer don’t work, this mean that there was not enough water.
3. As the mist maker normally working, the water in the container will constantly evaporate,when
the water is below the water level sensor,it will automatically be protected and stop misting,at this
time the spray lights will flash. After adding the water above the water level sensor,it continues
misting.
4.At the beginning of the work, the atomization quantity may be small,it will be stable misting and
become large after working sometime.When the winter is coming,the weather will affect the
misting rate,you can put some hot water to speed its stable misting rate.
5.When you don’t use the mist maker for a long time,please make sure pull the transformer/adapter
input lead wires out,which can avoid the accident/ unfortunate happening.
四
:Matters Needing Attention,Services and Maintenance
1.Pls operate them accotding to our instructions. Check the input voltage of transformer(generator)
if it’s suitable your local voltage standard before using.
2.Please don’t be covered by sundries above the mist maker,and hold more than 100mm space of
the sprayer,also can’t put the atomizer in the sealed container.
3.Please don’t let the mist maker work under the high temperature water,when the temperature
exceed 50
℃
, the hyperthermia/ superheating protection can play the important part, the misting
