3
Product Advantage:
1.Copper shell.Plating nickel chrome.Good heat dissipation.
2.Atomized particles small.
3.Humidification efficiency:a large quantity of humidification,humidification significantly faster
results.
4.Overheating protection and Lack water protection.
5.Easy to replace the disc piezoceramics and clean the piezoceramics.
二
ultrasonic negative ionizing mist maker is technological product,which its integration of aroma
diffuser and air refresher,help to freshen air,and the mist will add air humidity and clear static
electricity,all the things are well for human body.If adding one or two drops of disinfectant or
aroma liquid,not only it can disinfect and sterilize the air,but also make the room full of fragrant
air.
Make sure put the mist maker in water,it can easily be misting. Its wide usage is in different craft
article,rokery garden fountain decoration and beautification range, also in the hotel place,even the
appliance installation of industry humidification.
三
:Operating Instructions
1.When take out the mist maker from the package(please don’t crash the water level sensor).Please
put the mist maker placidly in the float,then put it in the water container.
If you will not use the float,the best working effect is keeping 30mm to 50mm of water above
ceramic disc,If water is too deep, it can not spray mist, but if water is too shallow, it will stop to
spray mist automatically,also when the water –lever sensor switch is out of water. It will also stop
to work.
Pls notice that there are no obstacles within the scope of more than 100mm space of the sprayer
ceramic water level(please check the drawing 1).
