Copyright © 2017 TTAAll Rights Reserved.
Product Introduction
11
Head direction
with an arrow
Figure 3
Figure 4
Combine well
Figure 5
Figure 6
1) Marking on the corresponding position of the fuselage and water tank kit as the
Figure1-2.
(The arrow on the copter frame and down shell of the copter is the
head direction,tank lid is the tail direction)
2) Put the fuselage bottom upward as the Figure1.
3) Install the fuselage and the water tank kit according to the mark ,1-3,2-4. It will be
completed like Figure3.
4) Marking on the corresponding position of the 6 landing gears as Figure 4.
5) Slip the landing gear gently into the curve as the “Mounting
Direction” arrow of
Figure5.
6) The rest 5 landing gears should be installed as above. It will be completed like Figure
6.
