Beijing Rongda science & Technology RD-FH8C7 Скачать руководство пользователя страница 7

Страница: 7 / 43

1.3operating

There is an indication button on the printer’s panel, and this button is not only an indicator
but also a function key.

1.3.1operating key

FEED button: Click the button and the printer feed paper one line. Hold down the button

and the printer continuously feed paper.

1.3.2 Operation

1. self- test

Step 1:

The power of the printer is turned off.

Step 2:

Press the indicator button

Step 3:

Energize

the printer for about 2 seconds and the printer will start the self-test.

2. Load paper

Step 1:

Open the security lock of the printer, and open the printer’s cover.

Step 2:

Pull out the right wrench of the printer, and open the printer's creel.

Step 3:

Remove the printer’s paper axis and insert the roll paper. Then put the paper into

the paper storehouse, and get stuck the paper axis, and fasten the printer creel.

Step 4:

Pull out the paper end, and fasten the cover. End the loading paper.

3 Paper feed

Under the printer charged state, hold down the buttons, and the printing paper starts

feeding.

1.3.3Indicator light

Power Light:

When the printer is powered, the indicator light is bright with green light for long.

Status Light:

When the printer lacks the paper, the indicator light will be in a state of continuous glint

with green light.

1.4

Appearance size and installation dimensions (Unit:

mm)

Appearance size: feet inches length 135.5 mm * width 136.5 mm * depth 66.5 mm

Installation dimensions: length 127.5 mm * width 128.5 mm

Содержание RD-FH8C7












































Результаты поиска

Содержание RD-FH8C7

Отзывы:

Похожие инструкции для RD-FH8C7

Бренды по названию

Популярные бренды

Beijing Rongda science & Technology RD-FH8C7, Руководство пользователя

Результаты поиска

Содержание RD-FH8C7

Отзывы:

Похожие инструкции для RD-FH8C7

Бренды по названию

Популярные бренды