Beijing Rongda science & Technology RD-FH8C7 Скачать руководство пользователя страница 39

Страница: 39 / 43

SendDataToPrinter(str,4);//

deepen ‘

0X30’

Chapter 4:

Maintenance and Troubleshooting

To ensure the printer to work normally, particularly note that we don't optionally

remove the print head and do not make changes to the printer through ourself. For

users not using the printer shell, more particularly note protecting the printing

head.

1. If the printer is not used for a long time, we do not turn on the printer power.

2. If the printer is not working properly, please turn off the printer's power.

3. Power supply must meet the requirements, or it is unfavorable for the printing head,

and even damages the printing head.

4. When replacing the paper roll, please note whether there are the paper scraps and

dust on the printing head. If having paper scraps and dust, please gently remove.

Note the thermal paper's obverse and reverse side, and if the reverse side is uncoated,
the printer can‘t print out the handwriting.

5. When the printer is printing or paper feeding, we can't tear the paper, and can't more

reversely drag the paper

6. Keep the printer control panel clean

7. When thermal printer prints unclearly, we can use the clean cotton ball soaked some

alcohol to gently wipe the surface dirt on the print head chip heating element.

8. When we connect the printer to the host, we should connect the printer data cable,

and then power on the printer.

9. To choose a good quality paper when we select the paper for the thermal printer can

not only improve the printing quality, but also reduce the abrasion for thermal film.

Содержание RD-FH8C7












































Результаты поиска

Содержание RD-FH8C7

Отзывы:

Похожие инструкции для RD-FH8C7

Бренды по названию

Популярные бренды

Beijing Rongda science & Technology RD-FH8C7, Руководство пользователя

Результаты поиска

Содержание RD-FH8C7

Отзывы:

Похожие инструкции для RD-FH8C7

Бренды по названию

Популярные бренды