Behringer GUITAR LINK UCG102, Руководство пользователя

Страница: 26 / 76

26
GUITAR LINK UCG102 User Manual
(3)
You can use a commercially available ¼" jack for
the -connection.
◊ ◊
We would like to draw your attention to the fact
that extremely loud sound levels may damage your
hearing as well as your headphones/loudspeakers.
Turn the VOLUME control fully clockwise before you
switch on the unit. Be careful to select a suitable
volume at all times.
(4)
You can connect the UCG102 to your guitar via the guitar
input (¼" jack). Use a commercial ¼" mono jack cable.
(5)
You can modify the guitar signal with the LEVEL switch.
At high signal levels, the CLIP LED (above the Behringer
LOGO) will light up red in which case you should set the
LEVEL switch to LOW.
(6)
The blue LED indicates the status of the USB connection.
3. Application Example
You can connect the UCG102 directly to your computer in order to
record, play along to a playback or play directly over the modeling
amps and effects. The UCG102 lets you get started immediately,
wherever you are. Simply hook up and start to rock.
3.1 Operation of the connector
UCG102
PC/Mac
Monitor
MS16
(optional)
HPS3000
Guitar
Fig. 3.1: Wiring of the UCG102
Use the USB cable to connect the GUITAR LINK UCG102
to your computer. The USB unit of the UCG102 is bus
powered—no separate power supply is needed. The blue LED
(6)
lights up and the system indicates the connection of a USB
audio unit.