background image

2

EURORACK  UB1222FX

-PRO

This symbol, wherever it appears, alerts you to the

presence of uninsulated dangerous voltage inside

the  enclosure—voltage  that  may  be  sufficient  to

constitute a risk of shock.

This  symbol,  wherever  it  appears,  alerts  you  to

important operating and maintenance instructions

in  the  accompanying  literature.  Please  read  the

manual.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION:

To reduce the risk of electric shock, do not remove

the  top  cover  (or  the  rear  section).  No  user

serviceable parts inside; refer servicing to qualified

personnel.

WARNING:

To reduce the risk of fire or electric shock, do not

expose this appliance to rain and moisture.

DETAILED SAFETY INSTRUCTIONS:

1)  Read  these  instructions.

2)  Keep  these  instructions.

3)  Heed  all  warnings.

4)  Follow  all  instructions.

5)  Do  not  use  this  device  near  water.

6)  Clean  only  with  a  dry  cloth.

7)  Do  not  block  any  ventilation  openings.  Install  in

accordance  with  the  manufacturer’s  instructions.

8) Do not install near any heat sources such as radiators,

heat  registers,  stoves,  or  other  apparatus  (including

amplifiers)  that  produce  heat.

9)  Do  not  defeat  the  safety  purpose  of  the  polarized  or

grounding-type  plug.  A  polarized  plug  has  two  blades

with  one  wider  than  the  other.  A  grounding  type  plug

has  two  blades  and  a  third  grounding  prong.  The  wide

blade  or  the  third  prong  are  provided  for  your  safety.  If

the  provided  plug  does  not  fit  into  your  outlet,  consult

an  electrician  for  replacement  of  the  obsolete  outlet.

10)  Protect  the  power  cord  from  being  walked  on  or

pinched  particularly  at  plugs,  extension  cords,  and  the

point  at  which  they  exit  the  unit.

11)  Only  use  attachments/accessories  specified  by  the

manufacturer.

12)  Use  only  with  the  cart,  stand,  tripod,  bracket,  or  table

specified  by  the  manufacturer,  or  sold  with  the  device.

When  a  cart  is  used,  use  caution  when  moving  the  cart/

device  combination  to  avoid  injury  from  stumbling  over

it.

13)  Unplug  this  device  during  lightning  storms  or  when

not  used  for  long  periods  of  time.

14)  Refer  all  servicing  to  qualified  service  personnel.

Servicing  is  required  when  the  unit  has  been  damaged

in  any  way,  such  as  power  supply  cord  or  plug  is

damaged,  liquid  has  been  spilled  or  objects  have  fallen

into  the  device,  the  unit  has  been  exposed  to    rain  or

moisture,  does  not  operate  normally,  or  has  been

dropped.

All manuals and user guides at all-guides.com

Содержание Eurorack UB1222FX-PRO
















Отзывы: