16
EUROGRAND EG8080-
BK
You can only activate those tracks for playback
which actually contain note information.
2) If you want to have a metronome-backed playback, press
the METRONOME button to switch on the metronome.
3) Press the SELECT button in the TEMPO/EDIT MODE section
until the TEMPO LED lights up, then use the two
buttons
to adjust the playback tempo.
You can play back a recording at its original tempo
by pressing the two
buttons at the same time.
4) Press the START/STOP button to play back the recording.
The current meter is constantly shown in the display.
During playback the two tracks can be switched
on/off at any time.
You can accompany the music sequencer playback
with the currently selected sound.
TIP: If the right-hand part has been recorded on
track 2 and the left-hand part on track 1, you can
switch off either of the tracks and practice its part
live during playback. The volume of the muted track
is adjustable. If necessary you can play it back in
the background at low volume for support (see
chapter 6.5.5).
5) To stop the playback, press the START/STOP button again.
6.5.4 Repeating musical passages for practicing
The following section describes how to play back a specific
passage of a recorded music piece repeatedly. This function is
ideal for practicing a specific difficult passage recorded by your
piano teacher.
To make the best use of this function, the left and
right-hand parts should be recorded separately
on tracks 1 and 2. In this case, you can play back
one part only with the music sequencer, while you
practice the other part.
1) Select the track to be played back, so that the PLAY LED
above the corresponding TRACK button lights up.
.
The volume of a muted track is adjustable (see
chapter 6.5.5).
2) Press the START/STOP button to play back the selected
track.
3) Press the SELECT button in the TEMPO/EDIT MODE section
when the playback has reached the point from which you
want to start repeating a passage.
The display reads:
A-
:
Starting point of the loop is set.
4) Press the SELECT button again when the playback reaches
the point where you want to end the repetition of a passage.
The display reads:
A-b
:
Ending point of the loop is set.
The musical passage is now repeated continuously, so that you
can practice it to perfection.
5) When you want to stop practicing, press the START/STOP
button again to stop the playback.
Press the SELECT button again to quit repetition
mode.
The passage marked as a loop for repetition is
automatically erased when you quit music
sequencer mode.
6.5.5 Setting the volume of muted tracks
This function allows you to set the volume of muted tracks.
Please enter EDIT mode (see chapter 6.1) and select
the following function.
6. ADVANCED OPERATION
