Behringer EUROGRAND EG2280USB, Руководство пользователя

Страница: 17 / 32

17
EUROGRAND EG8280USB/EG2280USB User Manual
1) Press the REC button in the SEQUENCER section to enter record mode.
The REC LED above the TRACK 1 or TRACK 2 buttons lights up and the dots in
the display start flashing in the rhythm of the selected metronome tempo,
thus indicating the beat.
◊
Be sure not to press the button during the following steps.
Otherwise, a new recording would be made on the selected track
erasing all the data recorded before.
2) Use the TRACK button to select the track whose settings you wish to edit.
If you want to edit global settings (e.g. tempo, measure, etc.) you can select
either one of the two tracks.
3) Edit the settings as described in the chapters mentioned above.
4) If necessary, repeat step 2 for the second track.
5) Press the REC button to quit record mode.
The changes made have now been stored in the music sequencer. When you play
back the music piece, the new settings will be effective. All previous settings
are deleted.
5.5.7 Sync start
You can set the music sequencer playback-ready, so that it will start playback as
soon as you play a key on the keyboard. This function can be very helpful when
the music sequencer is used as an “accompanist”. The function is also available in
DEMO mode.
1) Make sure that the playback tracks are active (PLAY LED above the
corresponding TRACK button lights up green). If necessary, activate the
tracks by pressing their TRACK buttons in the SEQUENCER section.
2) Press and hold one of the active TRACK buttons, then press the
button in the SEQUENCER section.
A dot in the lower right-hand corner of the display starts flashing in the tempo
of the metronome, thus signaling that the instrument is set to sync start mode.
The sequencer starts playback as soon as you play a key on the keyboard.
◊
If you want to quit sync start mode, simply repeat step 2.
5.5.8 Start the music sequencer with foot pedal
This function allows you to reprogram the left soft pedal, so that it can be used to
start/stop the music sequencer. This is useful when you are playing a music piece
live and want to start a sequencer accompaniment at a later point during the
piece. When the pedal has been set accordingly, you can also use it to start/stop
playback in DEMO mode.
◊
Please enter EDIT mode (see chapter 5.1) and select the
following function.
Function:
E4.1
Value:
1, 2
Description:
1:
Soft pedal function (default setting)
2:
Music sequencer
5.6 System settings
The EG2280USB/EG8280USB provides several setting options to control the global
functions of the instrument. Please read below which options are available and
how you can edit their settings.
5.6.1 Key velocity
This parameter determines the volume of the sounds with reference to the key
velocity applied, i.e. you can set here how hard you have to strike a key to achieve
maximum volume.
+