Behringer DS2800, Быстрый старт

Страница: 7 / 14

DS2800 Controls
(1)
MOD
E indicator LEDs light up to
show the unit is powered on (ON)
and to indicate whether the unit
is in 2-in/4-out mode (2-4) or
1-in/8-out mode (1-8).
(2)
OUTPUT CHANNEL METER LEDs
show the output level for each
channel. The CLIP LED should
only light occasionally. If the
CLIP LED lights continuously,
rotate the channel’s LEVEL knob
counter-clockwise to reduce the
output level.
(3)
LEVEL knobs control the output
level for each output channel.
(4)
POWER button turns the unit on
when the button is pressed inward
and latched in the ON position.
To turn the unit off, press the
button inward to unlatch and then
release the button to the outward
OFF position.
(5)
RACK EARS allow you to mount
and fix the unit into a standard 1U
rack space.
(6)
POWER jack connects the unit to
AC power by using the included
IEC cable.
(7)
OUTPUT jacks send out copies of
the input signals received from the
INPUT A/B jacks. Each OUTPUT jack
uses balanced cables with XLR
connectors and has a dedicated
LEVEL control on the front panel.
(8)
LINK A/B
outputs send out exact
copies of the INPUT A/B signals
over balanced cables with XLR
connectors. The LINK output levels
are not adjustable.
(9)
MODE switch toggles between
2-in/4-out mode (2-4, in the
inward, latched position) and
1-in/8-out mode (1-8, in the
outward, un-latched position).
(10)
INPUT A/B jacks accept audio
signals from devices that use
balanced audio cables with XLR
connectors. When the DS2800 is in
1-in/8-out mode (1-8), only the
INPUT A XLR jack is active. When
in 2-in/4-out mode (2-4), INPUT A
and INPUT B are both active, and
each INPUT jack feeds signal to
four output jacks (OUTPUT jacks
1-4 for INPUT A, and OUTPUT jacks
5-8 for INPUT B).
(1) (2) (3) (4) (5)
(6) (7) (8) (9) (10)
(EN)
Step 2: Controls
12 13
Quick Start Guide DS2800