Behmor 2000AB, Руководство по эксплуатации

Страница: 7 / 21

V22 Gen 2000AB 120v 6
Control Panel and Functions:
Roast Cycle:
The system will roast according to
the Profile you have chosen, taking into account
how much you are roasting and any additional
time you have added. When the roast time has
reached 59 seconds remaining, the digital display will blink on and off. If you desire to add time, you can do so
(up to Profile maximums) until the display reads 00:01. If you allow the system to go to 00:00, it will
automatically go into it’s pre-programmed cooling cycle.
Cooling Cycle: The system has two cooling cycle programs, Manual and Automatic. The Automatic cooling
cycle starts when the roasting timer goes to 00:00. When cooling begins, the display will show the countdown
time for cooling. There is also a manual cooling cycle option available. Should you decide at any time to end a
roast, simply press the “Cool” button and cooling will begin. As with automatic cooling, the system timer will
reset and show a new countdown for the cooling cycle.
New***Unattended Safety Shutoff Feature (Err7) - See page 9
Each system’s function has been designed for a reason
. It is imperative you allow the system to perform as
designed for optimal performance and longevity. This is especially true of the cooling cycle. Failure to comply
with these recommendations or those listed in the Important Safeguards could result in a potential safety hazard.
If you do not understand a function or parts of the system, email us at tech@behmor.com and we will do our
best to answer any questions you might have. Please include a phone number so we can, if necessary, call to
better answer to your question.
Part 3: System Preparation, Start-up and Programming
Programs- New Features
See Page 9
Time Increments: Add or subtract time on roast
programs prior to Start or at any point during roast
cycle. Pressing “
+
” adds 15 seconds, “ – ” subtracts
10 seconds. Or with added C Button Feature- See
Pages 9, 10, 12 and 13
Profiles: Denotes how heat is applied to the beans.
P1 is the hottest profile, thus fastest roast time. P5 is
the most delicate of the profiles the slowest roast
time. See “Profiles” chart for details on heat
applications along with “Tips” section for more
details.
See Page 9 for Manual Mode details
Start : Starts the roasting cycle.
Cool : Allows the user to stop a roast at any time and
begin cooling the beans.
Light : The switch to turn the roast chamber light on
and off.
OFF : Shuts off the roaster. Do not press OFF during
the roast cycle except in an emergency situation
(such as a bean fire). Pressing OFF before the roast
cycle is complete could lead to excessive smoke and
create a fire hazard.