8
SECTION 3
P1350 AC POWER SUPPLY OPERATING INSTRUCTIONS
3.2
CONNECTING LOADS
The load is connected to the front panel “SHUKO” receptacle or optional rear panel terminals. Several
adaptors are available to mate with various international line cords. Table 3-2 lists the available
adaptors and their Behlman part numbers. The output circuit of the P1350 AC power supply is
transformer coupled and isolated from the input line power. This allows the unit to float or operate with
either side of the output transformer tied to ground or other potential. The output circuit consists of three
connections as illustrated in figure 3-2 below. The load is connected between the “High” and Low”
terminals while the third terminal is tied earth via the power supply chassis and input line cord.
3.3
OUTPUT ADAPTORS
Table 3-2 below lists the output adaptors available for the P1350 AC power supply.
OPTION#
ADAPTOR DESCRIPTION
BEHLMAN P/N
A001
SCHUKO to NEMA 5-15R
107-771-001
A002
SCHUKO to NEMA6-15R
107-771-002
A003
SCHUKO to UK 1-13R
107-771-003
A004
SCHUKO to SWISS SW1-10R
107-771-004
A005
SCHUKO to ITALIAN IT1-10R/16R
107-771-005
A006
SCHUKO to AUSTRALIAN A01-10R
107-771-006
Contact Behlman for any special requirements not listed above.
