23
1.3 Safety instructions
FZ03-1-set was manufactured and tested in accordance with standard DIN EN 60335-1
and has left the factory in perfect condition. To maintain it in perfect condition, the user
has to observe the safety instructions in this manual.
In all cases, the currently valid accident prevention regulations of the Accident
Prevention & Insurance Association for electrical plants and equipment have to
be followed.
Operation is only permitted with the voltage(s) specified on the product or in this
operating manual! Non-observance of the admissible voltage(s) may cause risks
for the user (high voltage) or damage the unit!
Only connect the product to correctly installed sockets. Take special care that the
grounding (PE) is correct.
To avoid electric shock, observe the relevant safety and VDE standards concern-
ing too high touch voltages when working with voltages exceeding 120 V (60 V)
DC or 50 V (25 V) eff. AC. The voltages given in brackets apply to specific fields
such as medical or agricultural.
Before powering on the product, ensure that the mains plug as well as the product
itself are in perfect working conditions. Check in particular if the cable or housing
is cracked, attrited, inadmissibly bent, cut or somehow damaged.
Safety of the user is no longer guaranteed in the following cases:
• Visible damage such as cracks, ruptures, holes in insulation or housing etc.
• The product does not function any longer
• The product was stored in unfavorable conditions
• The product was modified/changed
Do not use damaged or modified products, there is danger of an electric shock!
At the end of the lifetime dispose of products according to regulations.
The product is featured with an internal electrical fuse as well as a thermal pro-
tection circuit. The exchange of the internal fuse has to be done through the
BEHAbelt Service.
Only qualified personnel are allowed to carry out repair work. For this purpose,
please return the product to an authorized BEHAbelt service partner or directly to
BEHAbelt headquarters.
Please avoid that direct sunlight heats up the product. This is the only way to
ensure that the product works properly and has a long life. Direct sun light may
cause overheating and damage to the product and jeopardize the safety of the
user.
