BEHA UNITEST CHB5, Инструкция по эксплуатации

Страница: 21 / 36

1.0 Introduction / Scope of Supply
The UNITEST CHB 5 is a universal, multi-purpose electrical measuring instrument.
It comply with the standards DIN VDE 0411 and EN 61010, and provide safe, reli-
able operation. The clamp meter is a valuable tool for all sorts of measurements in
both trade and industry.
• 4 digit liquid-crystal display
• manual range selection for current, voltage measurements
• Contactless frequency measurement
• Clamp opening 30 mm
• MIN/MAX values
Scope of supply:
1 pce. UNITEST Clamp Meter CHB 5
2 pce. test leads with probes (red/black)
2 pce. battery 1,5V IEC LR6
1 pce. holster
1 pce. Instruction Manual
Further accessories, such as test leads, probes, connectors, etc., are listed in the
UNITEST catalogue.
2.0 Transport and Storage
Please keep the original packaging for later transport, e.g. for calibration. Any trans-
port damage due to faulty packaging will be excluded from warranty claims.
In order to avoid instrument damage, it is advised to remove accumulators when
not using the instrument over a certain time period. However, should the instrument
be contaminated by leaking battery cells, you are kindly requested to return it to the
factory for cleaning and inspection.
Instruments must be stored in dry and closed areas. In the case of an instrument
being transported in extreme temperatures, a recovery time of minimum 2 hours is
required prior to instrument operation.
3